Qingdao Monte New Wind Technology Co., Ltd. is a company that produces negative pressure fans. Before installation, it should be checked whether the axial flow negative pressure fan is intact. Check whether the connection parts are loose or not during installation. The gap between the blades and the air cylinder should be uniform and must not touch.

The cultured negative pressure fan is a kind of ventilation and cooling device. The negative pressure fan has a large displacement, low noise, good installation and ventilation, and these have a relative relationship with the blade. In the negative pressure fan, The quality of the fan blades affects the quality and service life of the negative pressure fan, and how long does the negative pressure fan run before the start of operation? Let's take a look at each of them below.

The blade is in a negative pressure fan. This component is a relatively important component of the Wuxi Hulin of the negative pressure fan plant, which affects the quality and service life of the cultured negative pressure fan. Therefore, the answer to this question is to have an impact and have a big impact. Therefore, on wind turbine blades, the point of concern is these specific aspects, such as wear resistance and corrosion resistance.

The negative pressure fan starts the test operation before the operation. In terms of time control, it should generally be two hours. During the operation of the equipment, it is necessary to observe whether the bearing and motor temperature of the negative pressure fan are abnormal. If there is an abnormality, the fan cannot be put into use. .

The above is the content of the negative pressure fan introduced by Qingdao Montexinfeng Technology Co., Ltd., so that everyone can clearly understand and have reference, so that even if it is encountered in actual work, it can be solved in time, so that some can be reduced. Need questions or troubles, if you want to know more about the contents of breeding negative pressure fans, please call our company to consult!