After the equipment is purchased, it will be regularly repaired and maintained, as is the bell fan. Regular maintenance is more important for the normal operation and use of negative pressure fans. How should we repair the bell fan every day?

First, regular maintenance

Develop a small inspection every week, a good habit of a major inspection in January, check the various parts of the equipment, and promptly solve and replace the problems found during the maintenance process. Do a good job of this inspection, you can prepare in advance, for potential failures, replace parts in time, reduce the possibility of its occurrence, of course, be careful not to overhaul the parameters when there is no abnormality, and do not need to carry out Replacing, frequency, disassembly and assembly of the equipment will not only improve its performance, but will increase the failure rate. This is something to be aware of.

Second, after-the-fact maintenance

After-the-fact overhaul is often in a passive state, and often causes large irreversible damage to the FRP negative wind pressure machine, and even dangerous to the surrounding environment and operators, and such a situation will have a combined reaction. It is difficult to say that it will be repaired in a short period of time. If it is applied to the field of animal husbandry, the loss caused by long-term high temperature and sultry heat is not very good.

Third, performance check

Status maintenance is to detect the operation of the equipment, based on which to predict whether its status is normal. The principle is: when the problem is found, the maintenance is carried out. With such a treatment method, the parameter state of each part of the heavy hammer fan can be monitored in real time, and the fault can be solved accurately without any useless work and waste of manpower and material resources. .

In short, the daily maintenance of the bell fan is not intentional, not only to achieve the normal operation of the equipment, but also to use peace of mind and peace of mind.