Push-pull fan
Advantages of push-pull fans:
Low investment, low energy consumption, good cooling effect, it can reduce the temperature to about 28 degrees, which is the same as human body temperature. If the water in the well is used as the water source of the water tank, the air can be fresh and humid compared with the air conditioner.
Product Features:
Frame: Advanced automatic processing technology, one-time molding, extra thick galvanized layer (150μg/m2), strong corrosion resistance.
A drain is added to the bottom. Pulley; aviation aluminum alloy V-shaped wheel, hot-pressed casting, light material, high strength, good toughness, continuous cracking;
Push-pull fan application:
1. Cooperate with wet curtain: It is used for cooling in the hot summer workshop. No matter how hot your workshop is, the system of push-pull fan can reduce the temperature of your workshop by about 8-10c and have a certain humidity.
2. Used in tanneries, electroplating plants and various chemical plants.
3. Applicable to labor-intensive enterprises: such as garment factories, various assembly workshops, Internet cafes, etc. Ventilation and cooling of greenhouses and livestock farms.
4. Suitable for places that need to be cooled and humid. Such as cotton spinning mills, wool mills, flax mills, weaving mills, etc.
performance | ||
Number of blades | 6 | |
Number of louvers | 10 | |
Fan blade diameter | Mm[inch] | 1,350 [53] |
Assembly quality | [kg] | 90 |
Ventilation when static pressure is 0Pa | M3/h[cfm/W] | 47,241[27,805] |
Ventilation at a static pressure of 50Pa | M3/h[cfm/W] | 39,684[23,357] |
Ventilation when static pressure is 80Pa | M3/h[cfm/W] | 33,050[19,454] |
Ventilation when static pressure is 100Pa | M3/h[cfm/W] | 27,633[16,264] |
Energy efficiency at 0Pa | M3/h/W[cfm/W] | 22.5[13.2] |
Environmental working temperature ≤ | °C[°F] | 50[122] |
Normal blade speed | 465 | |
IEC motor protection rating | IP55 | |
Motor insulation grade | F |