Circulation fan

Advantages of the circulating fan:
1. Accelerate air circulation and reduce heating cost. 2. Reduce the condensed water inside the building by using a circulating fan. 3. Improve the comfort and production rate of the livestock by using a circulating fan. 4. The fan casing is made of stainless steel or zinc-aluminum-magnesium alloy. The board is made into 5, each motor has passed the separate quality test, and the quality is guaranteed. 6. The transmission is subjected to dynamic and static balance verification. After the circulating fan is used, it is necessary to gradually open the vent valve of the equipment, and at the same time, Step by step to close the exhaust valve, this step is more important, and the sequence problems it has during operation are also considered. After completing the above step, the next step is to gradually close the small intake throttle valve and gradually close it to the state of 20-25 degrees, which is also an aspect that needs attention.

Then you can press the stop valve of the device, so that the device can be slowly shut down. In the process of stopping the machine, it is necessary to pay attention to whether there is any abnormality, if any, it needs attention. Timely to solve. After the equipment is shut down, it is necessary to do the cleaning work to ensure the normal operation of the subsequent use, which can also make the equipment use better. M3/h/w[cfm/W]